My feed
Premium

Please
or
to access all these features

Join our Pram forum for pram advice. Plus read our round up of the best pushchairs currently available.

Pushchairs

Just bought a pramette for a spare for my sister when she comes over & don't know how to work it?

15 replies

pinkchampagne · 28/08/2009 16:24

Bought it of someone on here for keeping over here when my sister visits with my nephew so that she doesn't have to pack so much in the car, but haven't got a clue how to even unfold it, never mind change it from pushchair to pramette mode! Can anyone help?!

OP posts:
Report
SpawnChorus · 28/08/2009 16:30

You mean a Mamas & Papas one? To unfold it, hold the handles and squeeze the grey erm..bits on the handles up and towards you, and sort of shake the pramette away from you. It should pop open.

Fark...I'm clearly NOT the right person give technical descriptions sorry.

Report
pinkchampagne · 28/08/2009 16:31

Lol! Yes I do mean the M&P one. Will try to find & squeeze the grey bits!!

OP posts:
Report
SpawnChorus · 28/08/2009 16:32

does this help?

Report
SpawnChorus · 28/08/2009 16:34

By the way - jolly good choice. My Pramette has been the BEST buy. I've used it pretty much constantly since DD was born 4.5 yrs ago, and will continue to use it for imminently due DC3!

Report
pinkchampagne · 28/08/2009 16:38

It is up thanks! Was only half up at first but obviously wasn't shaking it hard enough! How do I change it from pushchair to pram?

OP posts:
Report
pinkchampagne · 28/08/2009 16:46

Sorry, my pc didn't like that link you sent so won't open it. Have got it up now, just need to know how to change it into pramette mode & how to fold again!!

OP posts:
Report
MamaVoo · 28/08/2009 16:48

Have a stiff drink to hand when you convert it. I did mine quite a while ago and can't remember the ins and outs (open those zips on the back of the seat and see what happens) but I do know it nearly reduced me to tears. It looked so easy when the woman in the shop did it!

When you unfold it always be sure to click the clips on the legs into place or else you'll find the baby beginning to disappear as it folds itself back up. I speak from experience

Report
MamaVoo · 28/08/2009 16:51

To fold back up pull the clips on the front of the handles towards you and then pull the handle on the back of the pushchair at the top of the basket. Hope that makes sense.

Report
pinkchampagne · 28/08/2009 16:56

Tried that & it isn't folding yet! I have obviously done something wrong here!

OP posts:
Report
pinkchampagne · 28/08/2009 16:57

Oh, I seem to have done it now! Need some practise here I think! Opened the zip at the top of the seat & was all very confused so have zipped back up for now!!

OP posts:
Report
SpawnChorus · 28/08/2009 16:58

I'm going to C&P all the text for you. It'll look garbled, but prob still better than any explanation I try to give!

This is the html version of the file www.mamasandpapas.com/downloads/product_manuals_pdf/Prams-Pushchairs/Pushchairs/Pramette%20In st%20V6.pdf.
Google automatically generates html versions of documents as we crawl the web.
Page 1
PRAMETTE PUSHCHAIR
Dear Customer,
Thank you for choosing the Mamas & Papas Pramette Pushchair.
The stylish, lightweight and compact folding Pramette Pushchair is easily
converted from a pram into a pushchair so as your child grows and
develops so does your pushchair.
The Mamas & Papas Primo Viaggio Car Seat and Mypod / Navetta
Carrycot can also be attached to the pushchair using the Surefix ?right
first time? attachment system.
?1?
Subject
Page No.
Product Information ................................................................................................. 2
Instructions for safe use ........................................................................................ 3
Features .................................................................................................... .................... 4
General Operation
Opening the pushchair ....................................................................................... 5
Attaching the wheels .......................................................................................... 6
Fitting, opening & removing the bumper bar ............................................ 7
Fitting & removing the basket ........................................................................ 8
Attaching the cup holder .................................................................................. 8
Adjusting the handle length ........................................................................... 9
Adjusting the backrest ....................................................................................... 9
Operating the adjustable leg rest .................................................................. 10
Operating the swivel wheels ........................................................................... 11
Operating the brakes ......................................................................................... 12
Using the rear lever plate ................................................................................ 12
Attaching the hood ............................................................................................ 13
Removing the hood ........................................................................................... 13
Attaching the apron to the pushchair ........................................................ 14
Using & adjusting the harness ....................................................................... 15
Using the pushchair as a pram ......................................................................
16/17
Folding the pushchair ........................................................................................ 18
Fitting a footmuff or seat pad ....................................................................... 19
Fitting the Primo Viaggio Car Seat ............................................................... 20/21
Fitting the Mypod / Navetta Carrycot .......................................................... 22/23
Attaching the Coperto Raincover to the pushchair ................................. 24
Attaching the Coperto Raincover to the pram ......................................... 25
Care & Maintenance
Removing the fabric cover ............................................................................... 26/27
Care & maintenance ............................................................................................ 28
CONTENTS
Page 2
INSTRUCTIONS FOR SAFE USE
? WARNING: A CHILD?S SAFETY IS YOUR RESPONSIBILITY.
? WARNING: IT MAY BE DANGEROUS TO LEAVE YOUR CHILD
UNATTENDED.
? THIS PRODUCT IS NOT SUITABLE FOR RUNNING OR SKATING.
? WARNING: ANY LOAD ATTACHED TO THE HANDLES AFFECTS THE
STABILITY OF THE PRAM/PUSHCHAIR.
? Always ensure that your pushchair is fully erect and all locking clips are
engaged. (Take particular care if the PVC Raincover is fitted. Check that it is
not entangled or preventing the locking mechanism from functioning
correctly).
? Your pushchair is supplied with a five-point body harness. Children should be
harnessed in at all times. Ensure that the harness is correctly adjusted,
providing a snug fit around your child. Adjustments can be made using the
buckles on the shoulder, waist and crotch straps. Please refer to the ?Using &
adjusting the harness? page15. The pushchair is supplied with ?D? ring harness
attachment points. These are located on either side at the base of the backrest
and are for fitting a separate harness conforming to BS 6684 if required. We
recommend that an additional harness is used when the pushchair is used as a
pram.
? Always ensure the brakes are correctly engaged whenever the pushchair is left
for any reason, even if only for a short time on a flat surface.
? Care should be taken when using any PVC cover. Regularly check that your
child is comfortable and not over heating. There are mesh ventilation panels
on the sides of the cover. These are essential to aid the flow of cool air around
your baby. Unless it is raining, the raincover should either be removed or the
top section opened, see ?Attaching the Coperto Raincover? sections on pages
24 and 25.
? Always ensure your child is clear of moving parts before you adjust the
position of the backrest, footrest or canopy.
? Always manoeuvre your pushchair up and down kerbs and steps gently. Do not
let your pushchair drop. Carry it up stairs whenever possible.
? Never allow additional children to ride on the pushchair at any time.
? Never overload your pushchair with additional goods.
? Do not hang shopping from the handles. Do not use any replacement parts or
accessories e.g. child seats, raincovers, stand-on platforms etc, except those
recommended or supplied by Mamas & Papas. The use of non-approved
replacement parts or accessories may damage or make your pushchair unsafe.
? Never force your pushchair. Adjustments and locks should be free and easy to
operate.
? Do not store your pushchair in a damp place. Always allow the fabric to dry
naturally away from direct heat.
? The basket supplied with your pushchair is designed to hold a maximum of
3kg. Excessive weight could damage the basket or impede the safe operation
of the pushchair.
? We recommend that you fit a Mamas & Papas Sun Canopy to shade your child
from direct sunlight. We recommend that this is used in conjunction with the
appropriate sun protection cream and clothing.
?3?
?2?
PRODUCT INFORMATION
This pushchair has been designed and tested to comply with the latest British and
European safety standards.
Important: Read these instructions carefully and keep them for future
reference. Your child?s safety may be affected if you do not follow the
instructions.
? This pushchair is designed for children from birth to 15kg - 3 years.
Please note: All children grow at different rates so the age given is an
approximation only.
? The pushchair can be simply converted into a pram.
? The Primo Viaggio Car Seat can be attached to the pushchair.
? The Mypod / Navetta Carrycot can be attached to the pushchair.
? The pushchair comes equipped with a five-point harness. Always use the
harness when your child is in the seat unit.
? The suspension on all four wheels gives your child a comfortable ride.
? A footrest that can be adjusted to two positions.
? A backrest that can be adjusted to four positions.
? A shower resistant removable fabric hood.
? Adjustable handle length for added comfort.
? Lockable swivel wheels for easy manoeuvring.
? An opening / removable bumper bar.
? A removable shopping basket.
? The pushchair is free standing once it has been folded.
The Mamas & Papas range of co-ordinating pram and pushchair accessories are
available. This range includes bags, footmuffs, sun canopies, raincovers, pram
bedding & mattresses. Also included are pram toys.
ACCESSORIES
AFTER SALES SERVICE: If you need assistance, spare parts or you are unhappy with any
aspect of the goods please contact Customer Services on: 0870 8307700,
or e-mail us at: [email protected]
Visit our website at www.mamasandpapas.com for the latest product information.
Page 3
OPENING THE PUSHCHAIR
Ensure the closing handle in
the centre of the pushchair?s
back is pushed down as far as
possible by gently pushing the
lever plates at the back fully
down.
Warning: Ensure that all
locking devices are
engaged before use.
?5?
Release the finger catches
located under both of the
handles by pulling them
upwards.
Lift the pushchair upwards
and the frame will
automatically start to open.
You may need to press down
lightly on the seat to ensure
the safety locks have
engaged. There are two safety
locks, one on each side of the
pushchair.
Remove the protective caps
from the ends of the handle
frame.
Never attempt to use the
pushchair with the covers
fitted as the locks will not
engage.
FEATURES
?4?
Bumper bar
Adjustable
leg rest
Swivel
wheel lock
Cup
holder
Handle height
adjustment button
Finger catch
Folded
frame lock
Brake lever
Brake lever
Lever plate
Hood
attachment
point
Closing
handle
Backrest adjustment
handle
Backrest
Safety
harness
Swivel wheel
lock
Handle height
adjustment button
Folded
frame lock
Carrying
handle
Apron
Hood
Page 4
?7?
FITTING, OPENING & REMOVING THE BUMPER BAR
Removing the bumper bar:
Locate the buttons beneath
both ends of the armrest and
push upwards then slide the
bumper bar out. You will need
to repeat this process if the
bumper bar is fully inserted.
The bumper bar can be opened
from one side only if required,
when you are removing an
older child from the pushchair
Fitting the bumper bar:
Align the ends of the bumper
bar with the slots in the ends
of the armrests. Push the
locking buttons on the ends of
the bumper bar inwards and
slide into the armrests until it
locks (1). Push the buttons
under the armrests upwards
and slide the bumper bar in (2).
Adjusting the bumper bar:
The bumper bar can be fitted in
two positions. To move the
bumper bar out, push the two
locking buttons upwards and
slide the bumper bar forwards
until the second buttons
engage with a click.
WARNING: Once the child is secured in the pushchair seat, the bumper
bar MUST be re-fitted or closed and locked back into the armrest.
?6?
ATTACHING THE WHEELS
Check that the pins in the
pushchairs legs are protruding
through the wheel housings.
Check the wheels are correctly
fitted by trying to pull them
off again.
Attaching the front wheels:
Slot the two front wheels
onto the ends of the
pushchairs front legs.
Push the wheel housing onto
the end of the leg until it
locks into position.
Always check that the wheels
are correctly fitted by
attempting to pull them off
again.
Attaching the back wheels:
Slot the rear wheels onto the
back legs of the pushchair.
Ensure that the brake peddles
on the wheels are facing out
from the back of the
pushchair. Push the wheels
down as far as they will go.
Fitting the bumper bar:
Before the bumper bar the caps
in the ends of the armrests
must be removed.
Push the buttons on the
underside of the armrest
upwards and slide the caps out
of the armrests.
Page 5
?9?
ADJUSTING THE HANDLE LENGTH
To lengthen the handle:
Push the top of the button in
just below the hand-grip and
pull towards you. Once the
handle has been adjusted it
will automatically lock into
place.
ADJUSTING THE BACKREST
The backrest can be adjusted
to one of four positions.
To lower the backrest:
Pull the backrest adjustment
handle upwards and lower the
backrest into the position you
require. Release the handle
and move the backrest
upwards or downwards until
it locks into position.
To shorten the handle:
Press the bottom of the
button in and push the grip
away from you.
To raise the backrest:
Grip the middle of the
backrest and lift upwards until
it locks in the position you
require.
?8?
ATTACHING THE CUP HOLDER
Slot the strap over the handle
as shown in the diagram, the
cup holder is supplied with a
left and right hand strap.
Ensure the handle adjustment
button slots into the gap in
the side of the strap.
Pinch the bottom of the strap
together.
Slot the cup holder onto the
strap as shown in the
diagram. Push the cup holder
onto the strap until it locks
into place.
Check that the cup holder is
correctly attached by
attempting to pull it of again.
CLICK
It is dangerous to place hot drinks in the cup holder. Never hang
additional items on the cup holder.
FITTING & REMOVING THE BASKET
The back section of the
basket has four webbing
loops that fit over the four
hooks attached to the back
legs of the pushchair.
The two front webbing loops
fit over the hooks on the font
legs of the pushchair.
The hooks are situated just
below the frame locks on
either side of the frame.
We recommend that you do
not exceed a load of 3kg in
the basket. Excessive weight
could damaged the basket.
Page 6
? 11 ?
OPERATING THE SWIVEL WHEELS
Fixed mode:
Push the catches between the
front wheels upwards.
The wheels will now be fixed
and will not swivel.
Swivel mode:
Push the catches between the
front wheels downwards.
The wheels can now be rotated
through 360Ä“.
The front wheels on the
pushchair can be used in either
the fixed or swivel mode.
? 10 ?
OPERATING THE ADJUSTABLE LEG REST
Positions 1 & 2 are for
general use. Position 3 is only
used when the Mypod /
Navetta Carrycot is attached
to the pushchair, see pages
22 to 23 for more
information.
1
2
3
To adjust the leg rest, pull the
locks on both sides of the leg
rest in the direction of the
arrows in the diagram. Now
either lift or lower the leg rest
whilst releasing the catches,
the leg rest will lock
automatically into position.
The leg rest on the front of
the pushchair can be adjusted
for the comfort of your child
and so that the Mypod /
Navetta Carrycot can be
attached.
Note: The leg rest must be in
the most vertical (down)
position when the pushchair is
being used by a child that can
sit unaided and the backrest
is in an upright position.
Page 7
? 13 ?
ATTACHING THE HOOD
To fit the hood to the
pushchair:
Clip the hood brackets onto
the frame as shown in the
diagram.
REMOVING THE HOOD
Push the two tensioning bars
down to lock the hood open.
Attach the two press studs on
the back of the hood to the
two on the top of the seat
back.
To remove the hood:
Undo all of the press studs and
fold the tensioning bars
upwards.
Hold the hood brackets as
shown in the diagram and pull
outwards from the pushchair.
? 12 ?
OPERATING THE BRAKES
USING THE REAR LEVER PLATE
Your pushchair is fitted with a
rear lever plate to help you
manoeuvre the pushchair up
kerbs. Apply downward
pressure with your toe to the
lever plate as you pull back on
the handles and the front
wheels will easily lift over the
kerb.
To engage the brakes:
Press down on both ends of
the brake bar with your toes.
Check the brakes are correctly
engaged by rocking the
pushchair backwards and
forwards.
To release the brakes:
Push upwards on both ends
of the brake bar with your
toes until the pushchair?s
wheels move freely.
WARNING: Always engage the brakes when you leave or let go of the
pushchair for whatever reason.
WARNING: Under no circumstances should children stand or ride on
the lever plate as it could cause the pushchair to become unstable or
damaged.
Page 8
? 15 ?
To attach the apron, first push
the bottom part of the apron
under the bumper bar.
ATTACHING THE APRON TO THE PUSHCHAIR
Fasten the zip on the bottom
edge of the apron to the zip
on the front edge of the
footrest cover.
? 14 ?
Locking the harness:
Remove the yoke from the
harness tidy, see above.
Lock the harness by pushing
the tongues on the ends of
the waist straps into the
buckle on the crotch strap
(1). The harness will
automatically lock when the
tongues have been fully
pushed in.
Unlocking the harness:
Squeeze the ends of the
tongues together (2) and
then slide them out of the
buckle (3). Your child can
now be removed from the
pushchair.
IMPORTANT: Every time you place your child in the pushchair or
when you position of the backrest always check that the harness is
correctly fitted and the shoulder and waist strap buckles are
correctly adjusted and a snug fit around your child.
WARNING: Always use the crotch strap in conjunction with the waist
belt.
USING AND ADJUSTING THE HARNESS
Page 9
Lower the backrest into the
lowest position, see page 9.
Lift the footend of the pram
upwards from the seats
backrest.
To fit the hood:
Attach the hood to the frame
on the opposite side to the
handles by pushing the hood
brackets onto the frame until
they lock in place.
Fasten the studs on the back
of the hood to the studs on
the underside of the
pushchair footrest.
Push the tensioning bars on
the sides of the hood
downwards until they lock
into place.
Attaching the apron:
Slot the apron over the
backrest of the pushchair.
Fasten the press studs on the
sides of the apron to the
studs on the sides of the
pushchair.
Reverse the procedure to
convert the pram back into a
pushchair.
? 17 ?
USING THE PUSHCHAIR AS A PRAM
The pushchair can be
converted into a pram for
children from birth until the
child can sit up by itself or
until it reaches a weight of
9kgs.
Remove the hood and apron
if they are fitted.
Raise the leg rest into its
highest position,
see page 10.
Pull the bumper bar out to its
fully extended position, see
page 7.
Unfasten the zip on the top
of the backrest.
Fold the cover down over the
front of the bumper bar
Zip the top of the backrest
cover to the front of the
footrest cover.
Push the cover down onto the
seat.
? 16 ?
Page 10
SPECIAL FEATURE
Not all models of the Pramette Pushchair are supplied with or use
this special feature. For more information please consult your retailer.
Before fitting the
footmuff/seat pad, unfasten
the harness and slide the
shoulder strap clips off the
two tongues.
FITTING A FOOTMUFF OR SEAT PAD
Shoulder
Straps
Lap
Strap
Lap
Strap
Crotch
Strap
Remove the crotch strap by
slotting the buckle on the end
of the crotch strap through
the hole in the seat and
fabric, see page 27.
Slot the webbing through the
lowest hole in the footmuff
back pad or seat pad, then
refit the crotch strap.
Slot the two shoulder straps
through the horizontal hole in
the middle of the footmuff
back pad or seat pad.
The two lap straps can either
go around the outside of the
back pad or seat pad, as in
Version 1.
Or slot through horizontal
slots in the sides of the
footmuffs back pad or seat
pad, as shown on Version 2.
Finally, slide the shoulder
strap attachments onto the
tongues of the buckle.
? 19 ?
Crotch
Strap
Shoulder
Straps
Lap
Strap
Lap
Strap
Version 1
Version 2
? 18 ?
FOLDING THE PUSHCHAIR
Ensure that the two locking
catches below the finger
catches lock over the clips on
the rear leg attachment
moulding, as shown in the
diagram.
Engage the brakes before
closing the pushchair.
Pull one of the finger catches
upwards until it locks into
position, then repeat for the
other finger catch.
Grip the handle in the centre
of the backrest and pull it
upwards as shown in the
diagram.
Continue to pull the handle
upwards until the pushchair is
fully folded.
WARNING: Do not push down vertically on the frame when folding. This
will cause the ends of the handles to hit the floor and may damage the
frame.
Page 11
Apply the brakes on the
pushchair before removing
the car seat.
Pull the lever located on the
back of the car seat upwards
and hold in the fully pulled
out position.
Lift the car seat clear of the
pushchair.
Pull the locks on the sides of
the frame outwards and hold.
Push the attachment brackets
down into there recesses and
pull the fabric cover back over
them.
Never place a child in the
pushchair with the brackets
up.
Do not attempt to attach
the car seat when the
pushchair is converted into
a pram.
? 21 ?
FITTING THE PRIMO VIAGGIO CAR SEAT
Apply the brakes on the
pushchair before operating
the attachment brackets.
Lower the backrest to its
lowest position by pulling the
lever at the top of the
backrest upwards, then lower
the backrest as far down as it
will go. Now raise the
backrest upwards one
position.
In the corners of the seat unit
where the backrest joins the
seat base there are two flaps.
Under the flap are the
attachment brackets. Rotate
the attachment brackets
upwards as far as it will go.
The attachment bracket will
lock in a vertical position.
Align the locking clip of the
car seat with the attachment
brackets of the pushchair.
Push the car seat down onto
the attachment brackets until
it clicks into place.
Check the car seat is firmly in
place by attempting to lift it
upwards.
? 20 ?
Page 12
Grip the centre of the
carrying handle with one
hand.
With the other hand, slide the
locking handle (positioned on
the foot end of the carrycot)
horizontally, then upwards
and hold.
Still holding the lock up, lift
the carrycot clear of the
pushchair.
Once the carrycot has been
removed always refit the
bumper bar, see page 6.
Pull the locks on the sides of
the frame outwards and hold.
Push the attachment brackets
down into the recesses and
pull the fabric cover back over
them.
Never place a child in the
pushchair with the brackets
up.
Never attempt to attach the
Mypod / Navetta when the
pushchair is converted into
a pram.
? 23 ?
FITTING THE MYPOD / NAVETTA CARRYCOT
Apply the brakes on the
pushchair before operating
the brackets. Lower the
backrest to its lowest position
by pulling the lever at the top
of the backrest upwards then
lower the backrest as far
down as it will go.
In the corners of the seat unit
where the backrest joins the
seat base there are two flaps.
Under the flap are the
attachment brackets. Rotate
the attachment bracket
upwards as far as it will go.
The bracket will lock in a
vertical position.
Before fitting the carrycot to
the pushchair you will need to
remove the bumper bar, see
page 7.
Align the locking clip of the
carrycot with the attachment
brackets of the pushchair.
Push the carrycot down onto
the attachment brackets until
it clicks into place.
Check the carrycot is firmly in
place by attempting to lift it
upwards.
? 22 ?
Page 13
? 25 ?
Never leave your child unattended in the pushchair with the
raincover fitted. This product is designed for outdoor use only. Take care
when fitting or adjusting the raincover as undue force may damage the
raincover. Open the front of the raincover when inside or in hot weather to
prevent your child from over heating.
ATTACHING THE COPERTO RAINCOVER TO THE PRAM
Zip the hood and
raincover
together. Support
the raincover
whilst zipping it
to the hood.
Attach the straps at the
bottom of the raincover
around the frame above
the rear wheels.
Attach the straps on
the sides of the
raincover around the
frame. Fasten them
in place with the
press studs on the
strap.
Opening the front of the raincover:
The top of the raincover should be unzipped
from the hood and folded onto the apron
when taking your child inside or during
warm dry spells
Folding the pushchair with the raincover
fitted: Unfasten the press studded straps
and fold the hood back. Gather the
raincover up and place it on top of the
fabric hood. Check that the raincover does
not become trapped when folding the
pushchair.
SPECIAL FEATURE
Not all models of the Pramette Pushchair are supplied with or use
this special feature. For more information please consult your retailer.
? 24 ?
Never leave your child unattended in the pushchair with the
raincover fitted. This product is designed for outdoor use only. Take care
when fitting or adjusting the raincover as undue force may damage the
raincover. Open the front of the raincover when inside or in hot weather to
prevent your child from over heating. Note: The raincover can be fitted
with the Primo Viaggio Car seat fitted.
ATTACHING THE COPERTO RAINCOVER TO THE PUSHCHAIR
Zip the hood and
raincover
together. Support
the raincover
whilst zipping it
to the hood.
Attach the straps at the
bottom of the raincover
around the frame below
the footrest.
Attach the straps on
the sides of the
raincover around the
frame. Fasten them
in place with the
press studs on the
strap.
Opening the front of the raincover:
The top of the raincover should be unzipped
from the hood and folded onto the apron
when taking your child inside or during
warm dry spells
Folding the pushchair with the raincover
fitted: Unfasten the press studded straps
and fold the hood back. Gather the
raincover up and place it on top of the
fabric hood. Check that the raincover does
not become trapped when folding the
pushchair.
SPECIAL FEATURE
Not all models of the Pramette Pushchair are supplied with or use
this special feature. For more information please consult your retailer.
Page 14
Unfasten the two press studs
holding the seat fabric to the
frame.
Gently slide the cover off the
front of the footrest.
Slide the sides of the cover
off the sides of the frame.
Slide the harness through the
slots in the sides of the cover.
Finally, pull the cover off the
back of the pushchair.
? 27 ?
Unfasten one side of the
harness by removing the
screw as shown in the
diagram, you will need to
hold on the other side of the
frame with your fingers.
REMOVING THE FABRIC COVER
Slide the ends of the armrest
covers towards the bumper
bar, then pull away from the
armrest to release the
attachment studs.
Repeat the same process to
remove the rear attachment
studs from the armrests.
Unfasten the press studs at
the bottom of the wings of
the backrest.
? 26 ?
Slot the crotch strap through
the slot in the seat of the
pushchairs cover.
Page 15
GUARANTEE
To validate this guarantee, please fill in the coupon and return to:
Mamas & Papas Ltd, Colne Bridge Road, Huddersfield, West Yorkshire, HD5 0RH.
Name
Address
Postcode
Retailer
Home Phone No.
Baby?s date of birth
Purchase Price
Date
Item purchased Pramette Pushchair
By validating your guarantee, your information will be entered onto our database. If you do not wish to receive information
from other reputable companies, please let us know.
I0
2
5
2
:
V
6
/0
5
/0
6
ALL OUR PRODUCTS ARE MADE FROM THE FINEST QUALITY MATERIALS
AND ARE MANUFACTURED UNDER THE STRICTEST QUALITY CONTROLS
We guarantee all our products or part thereof, for a period of six months from the date of delivery to the consumer
against faulty manufacture. This guarantee is not effective against damage caused as a result of incorrect usage of the
product or accidental damage. This in no way affects your statutory rights.
CARE AND MAINTENANCE
Your pushchair is a valuable piece of equipment and deserves careful handling.
? Regularly check that the safety harness is correctly fitted and that the webbing has not
become frayed or damaged. If the harness is damaged, we recommend that a new one is
fitted. For more information contact our Customer Services on 0879 8307700.
? Clean the plastic parts of the pushchair with a damp cloth, do not use abrasives or bleach.
? Clean and lubricate the wheels, safety locks (where appropriate) and sliding parts
using a light oil or silicon spray. Do not use heavy oil as this will attract dust and
grit which tend to clog and damage moving parts. If in any doubt contact our
Customer Services on 0879 8307700.
? We strongly recommend that you have your pushchair serviced regularly, particularly after
the first six months. To do this contact either your retailer or call our Customer Services on
0879 8307700.
Fabric care
? All the Mamas & Papas pushchair fabrics are shower resistant. Should your pushchair
become wet do not fold the hood or apron when you take the item inside. Always allow
the fabrics to dry naturally away from strong heat sources such as fires, radiators and out
of direct sunlight.
? Whilst fabrics are carefully selected and tested, washing, wear and normal exposure to
bright sunlight may cause their colour to change.
? The exposed edges of fabric covers are often the first to wear and fray, remember this
when storing or transporting your pushchair/carrycot and accessories.
? Light soiling to the pushchair can be removed with a damp sponge and a mild detergent.
? Washing instructions: Remove the fabrics following the instructions given in these
instructions. Hand wash the fabric with a mild detergent at 30Ä“, dry the fabric flat away
from direct heat and do not tumble dry. Do not use abrasives or bleach or solvents to clean
the fabric.
? Should a fault arise with your pushchair please contact either your retailer or phone our
Customer Services on 0879 8307700.
? 28 ?
AFTER SALES SERVICE: If you need assistance, spare parts or you are unhappy with any
aspect of the goods please contact Customer Services on: 0870 8307700,
or e-mail us at: [email protected]
Visit our website at www.mamasandpapas.com for the latest product information.

Report
pinkchampagne · 28/08/2009 17:05

Wow, thanks for all that - will read through & attempt to teach myself so that I can impress my sister!

OP posts:
Report
pinkchampagne · 28/08/2009 17:22

Wahay, have changed it into pramette mode quite easily! Seem to be having more trouble with the folding & unfolding atm so need more practise!
You have to have it in pushchair mode to fold don't you?

OP posts:
Report
SpawnChorus · 28/08/2009 17:57

Um...I'm not sure what the official line is on that. I'm sure I folded it while in pram mode...perhaps I scrunched it aginst its will? No harm came of it though.

Report
pinkchampagne · 28/08/2009 20:45

Managed to fold it in scrunched mode! Think I have sussed it now - even gave my sister a demo! Thanks all

OP posts:
Report
Please create an account

To comment on this thread you need to create a Mumsnet account.